NAIT series

MT-36 LED

Maximum performance for regional and main roads.

Product overview

Equipped with full LED package this version of the luminaire can reach peak performance with 36 high power LEDs.

Interlinking cities takes roads on a complex journey through lively cities and calmer countryside. Such roads usually present a challenge with varying geometry and user structure, therefore a luminaire must provide clear vision for every type of user, whether a pedestrian, cyclist, or a big truck. A step up in luminance with diverse optical system is required to ensure such safe user navigation through a more complicated traffic network at moderately high and average speeds through different scenarios.

While the same luminaire can also pack a lower power with a higher luminous efficiency when such demands are needed and evaluated, to meet the requirements and lighting standards of a given road.

Property features

Modern design with an emphasis on optimizing aluminum die-casting. The luminaire edges are rounded for better color durability. All screws have been cleverly positioned outside the IP66 area.

Typical project case

Up to three lanes

Slow to moderate speed

Installation height 8 - 12m

Mixed traffic

Various column configuration

With pedestrians

Specifications

Performance data

System flux:	5.170 lm - 10.837 lm
System power:	51 W - 75 W
CCT:	1800K, 2200K, 2700K, 3000K, 4000K
CRI:	≥70, ≥80
Classification:	IEC protection class I/II, IP66, IK10
Surge protection:	10 kV (L/N-ground), 6 kV (L-N)
Smart lighting:	Virtual midnight, AstroDIM, StepDIM, DALI
On request:	4-pin socket (ZHAGA book 18), CLO
Overtime performance:	L80B10 100.000 hours at Ta=25°C
Certification:	CE, ENEC PLUS

Installation

Mounting device:	For pole spigot from ⲫ42 to ⲫ60 mm
Fixation type:	post top / side entry
Tilt angle:	0°/ ±5/ ±10 /±15
Connecting:	IP66 fast connector (2/3 or 5 pole)

Features

Net weight:	6,20 kg
Pre-wiring:	preinstalled with fast connector - Default: 3-pin fast connector IP66 on 0,2m 3G1 cable - Optional: custom cable length with or without fast connector

Materials

Housing material:	High pressure die-cast aluminum
Finish:	Polyester powder-coated paint in RAL 9007
Optic material:	PMMA High transparent
Optical cover:	OPTIWHITE 5 mm tempered glass
Cable gland:	stainless steel with pressure equalization membrane
Fixation bolts:	stainless steel grade A4

Measurements

Commonly used optics

CO

Beam with excellent longitudinal luminance uniformity fulfilling EN13201 M-class requirements where road width is equal to or less the pole height.

H3

Excellent longitudinal luminance uniformity for EN13201 M-class where road width is ≥ the pole height. Usually to illuminate up to three lanes in front of the pole.

H4

Excellent longitudinal luminance uniformity for EN13201 M-class where road width is wider than the pole height. Usually to illuminate up to four lanes in front of the pole.