MT-12 LED
To establish satisfactory lighting for residential roads, sidewalks, parks, etc., we highly recommend this luminaire’s 12 LED package as an optimal choice.
Residential locations that build up around the outside of cities usually involve a slowly paced traffic of various users. Luminaire installation on low poles is therefore a common practice to prevent light trespass while considering appropriate optical distribution, CCT and dimming ontrols to prevent glare, enhance comfort and the sense of well-being at night. This solution presents a very high energy saving potential, for very little power is needed to meet the demands of a relatively low lighting class in these areas. Additional dimming options are available to even further enhance the saving potential, while respecting the lighting requirements and keeping the streets securely lit at night.
Additional dimming options are available to even further enhance the saving potential, while respecting the lighting requirements and keeping the streets securely lit at night.
Modern design with an emphasis on optimizing aluminum die-casting. The luminaire edges are rounded for better color durability. All screws have been cleverly positioned outside the IP66 area.
| System flux: | 656 lm - 10.838 lm |
| System power: | 5 W- 25 W |
| CCT: | 1800K, 2200K, 2700K, 3000K, 4000K |
| CRI: | ≥70, ≥80 |
| Classification: | IEC protection class I/II, IP66, IK10 |
| Surge protection: | 10 kV (L/N-ground), 6 kV (L-N) |
| Smart lighting: | AstroDIM, Virtual Midnight, StepDIM, DALI |
| On request: | 4-pin socket (ZHAGA book 18), CLO |
| Overtime performance: | L80B10 100.000 hours at Ta=25°C |
| Certification: | CE, ENEC PLUS |
| Net weight: | 6,10 kg |
| Pre-wiring: | preinstalled with fast connector - Default: 3-pin fast connector IP66 on 0,2m 3G1 cable - Optional: custom cable length with or without fast connector |
| Mounting device: | For pole spigot from ⲫ42 to ⲫ60 mm |
| Fixation type: | post top / side entry |
| Tilt angle: | 0°/ ±5/ ±10 /±15 |
| Connecting: | IP66 fast connector (2/3 or 5 pole) |
| Housing material: | High pressure die-cast aluminum |
| Finish: | Polyester powder-coated paint in RAL 9007 |
| Optic material: | PMMA High transparent |
| Optical cover: | OPTIWHITE 5 mm tempered glass |
| Cable gland: | stainless steel with pressure equalization membrane |
| Fixation bolts: | stainless steel grade A4 |
CO
Beam with excellent longitudinal luminance uniformity fulfilling EN13201 M-class requirements where road width is equal to or less the pole height.
H3
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is ≥ the pole height. Usually to illuminate up to three lanes in front of the pole.
H4
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is wider than the pole height. Usually to illuminate up to four lanes in front of the pole.
LN
IESNA Type II (medium) beam applicable for European P-class standard pedestrian lighting.
ND
IESNA Type II (medium) beam applicable for European P-class standard pedestrian lighting and M-class roads.
PC
Fully asymmetric beam designed to highlight right side traffic pedestrian crossings.
PR
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is wider than the pole height.
WA
IESNA Type II (medium) beam with excellent backlight control, illuminance uniformity and cutoff.
WD
Universal road lighting beam with excellent mixed illuminance and luminance uniformity. Typically IESNA Type III (medium).
| Attachment | Size |
|---|---|
 Catalogue MT-12 LED | 7.38 MB |
