Skip to main content
NAIT series

MT-24 LED

A perfect balance between power and comfort
Product overview

This luminaire is used when more luminous flux is needed to comply with higher demands of increasing traffic. This usually starts when lighting projects involve bigger roads with higher lighting poles. Such examples are mainly conflict zones, for instance; pedestrian crossings, where adequate vertical luminance must be provided, or roundabouts where uniform illumination is of critical importance. This luminaire can deliver almost double the luminous flux than its predecessor, while maintaining visual uniformity, with a fraction of a price difference.

Elegant design
MT-24 LED
MT-24 LED
MT-24 LED
MT-24 LED
MT-24 LED
MT-24 LED
MT-24 LED
MT-24 LED
MT-24 LED
MT-24 LED
Property features

Modern design with an emphasis on optimizing aluminum die-casting. The luminaire edges are rounded for better color durability. All screws have been cleverly positioned outside the IP66 area.

Alternate text
Alternate text
Alternate text
Typical project case
Up to three lanes
Slow to moderate speed
Installation height 6 - 9m
Mixed traffic
Various column configuration
With pedestrians
Specifications
Performance data
System flux: 2.747 lm - 7.262 lm
System power: 26 W - 50 W
CCT: 1800K, 2200K, 2700K, 3000K, 4000K
CRI: ≥70, ≥80
Classification: IEC protection class I / II, IP66, IK10
Surge protection: 10 kV (L/N-ground), 6 kV (L-N)
Smart lighting: Virtual midnight, AstroDIM, StepDIM, DALI
On request: 4-pin socket (ZHAGA book 18), CLO
Overtime performance: L80B10 100.000 hours at Ta=25°C
Certification: CE, ENEC PLUS

 

Installation
Mounting device: For pole spigot from ⲫ42 to ⲫ60 mm
Fixation type: post top / side entry
Tilt angle: 0°/ ±5/ ±10 /±15
Connecting: IP66 fast connector (2/3 or 5 pole)

 

Features
Net weight: 6,20 kg
Pre-wiring: preinstalled with fast connector
- Default: 3-pin fast connector IP66 on 
 0,2m 3G1 cable
- Optional: custom cable length with or 
 without fast connector

 

Materials
Housing material: High pressure die-cast aluminum
Finish: Polyester powder-coated paint in RAL 9007
Optic material: PMMA High transparent
Optical cover: OPTIWHITE 5 mm tempered glass
Cable gland: stainless steel with pressure equalization membrane
Fixation bolts: stainless steel grade A4

 

Measurements
MT-24 LED
MT-24 LED
MT-24 LED
MT-24 LED
MT-24 LED
Commonly used optics
CO

CO

Beam with excellent longitudinal luminance uniformity fulfilling EN13201 M-class requirements where road width is equal to or less the pole height.

H3

Excellent longitudinal luminance uniformity for EN13201 M-class where road width is ≥ the pole height. Usually to illuminate up to three lanes in front of the pole.

H4

Excellent longitudinal luminance uniformity for EN13201 M-class where road width is wider than the pole height. Usually to illuminate up to four lanes in front of the pole.

LN

IESNA Type II (medium) beam applicable for European P-class standard pedestrian lighting.

ND

IESNA Type II (medium) beam applicable for European P-class standard pedestrian lighting and M-class roads.

PC

Fully asymmetric beam designed to highlight right side traffic pedestrian crossings.

PR

Excellent longitudinal luminance uniformity for EN13201 M-class where road width is wider than the pole height.

WA

IESNA Type II (medium) beam with excellent backlight control, illuminance uniformity and cutoff.

WD

Universal road lighting beam with excellent mixed illuminance and luminance uniformity. Typically IESNA Type III (medium).

Made in EU
Astro dim
Vent
Step dim
ISO
CE
IP66
IK10
ENEC22
Enec plus
Earth
Double insulation
Dali
Catalogue & downloads
AttachmentSize
PDF icon NAIT MT 24LED9.66 MB

Lighting your way

EU - Europski sklad za regionalni razvoj, Spirit slovenjia & RS - Ministrstvo za gospodarski razvoj in tehnologijo