MT-24 LED
The NAIT MT-24 LED significantly boosts output by utilizing 24 high-performance LEDs within the standard NAIT housing. It features the integrated adjustable bracket as standard, enabling ±15° tilt control to maintain a precise 0° horizontal alignment. This capability is vital for maximizing optical efficiency and safety while ensuring strict adherence to ULOR=0 regulations, preventing unwanted sky glow in urban areas.
Application & Performance: Designed for urban collector roads and busy intersections, the MT-24 LED is ideal for mounting heights of 6–8 meters. It delivers exceptional uniformity and visual comfort, reducing glare for both drivers and pedestrians.
Standards Compliance: Certified for long-term operational resilience (L90B10), the luminaire includes 10kV surge protection as standard. It meets all European road lighting regulations and Eco-design directives.
| System flux: | 2.747 lm - 7.262 lm |
| System power: | 26 W - 50 W |
| CCT: | 1800K, 2200K, 2700K, 3000K, 4000K |
| CRI: | ≥70, ≥80 |
| Classification: | IEC protection class I / II, IP66, IK10 |
| Surge protection: | 10 kV (L/N-ground), 6 kV (L-N) |
| Smart lighting: | Virtual midnight, AstroDIM, StepDIM, DALI |
| On request: | 4-pin socket (ZHAGA book 18), CLO |
| Overtime performance: | L80B10 100.000 hours at Ta=25°C |
| Certification: | CE, ENEC PLUS |
| Mounting device: | For pole spigot from ⲫ42 to ⲫ60 mm |
| Fixation type: | post top / side entry |
| Tilt angle: | 0°/ ±5/ ±10 /±15 |
| Connecting: | IP66 fast connector (2/3 or 5 pole) |
| Net weight: | 6,20 kg |
| Pre-wiring: | preinstalled with fast connector - Default: 3-pin fast connector IP66 on 0,2m 3G1 cable - Optional: custom cable length with or without fast connector |
| Housing material: | High pressure die-cast aluminum |
| Finish: | Polyester powder-coated paint in RAL 9007 |
| Optic material: | PMMA High transparent |
| Optical cover: | OPTIWHITE 5 mm tempered glass |
| Cable gland: | stainless steel with pressure equalization membrane |
| Fixation bolts: | stainless steel grade A4 |
CO
Beam with excellent longitudinal luminance uniformity fulfilling EN13201 M-class requirements where road width is equal to or less the pole height.
H3
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is ≥ the pole height. Usually to illuminate up to three lanes in front of the pole.
H4
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is wider than the pole height. Usually to illuminate up to four lanes in front of the pole.
LN
IESNA Type II (medium) beam applicable for European P-class standard pedestrian lighting.
ND
IESNA Type II (medium) beam applicable for European P-class standard pedestrian lighting and M-class roads.
PC
Fully asymmetric beam designed to highlight right side traffic pedestrian crossings.
PR
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is wider than the pole height.
WA
IESNA Type II (medium) beam with excellent backlight control, illuminance uniformity and cutoff.
WD
Universal road lighting beam with excellent mixed illuminance and luminance uniformity. Typically IESNA Type III (medium).
| Attachment | Size |
|---|---|
 Catalogue MT-24 LED | 9.51 MB |
