MT-16 LED-F
The NAIT MINI MT-16 LED-F greatly enhances the series' capabilities. This model effectively doubles the performance of its smaller counterpart by featuring more high-performance LEDs, resulting in increased power and superior luminous flux. The Model MT-16 LED-F functions as the entry-level luminaire with a fixed bracket. This setup provides a secure and stable mounting angle, specifically set at 0° or 90°. It is suitable for standard installations that require a fixed, horizontal or vertical position, ensuring simplicity and compliance.
Application & Performance: Mainly designed for higher installation heights and projects with increased illumination needs. The MT-16 LED-F preserves the series’ consistent aesthetic design while providing an advanced, environmentally friendly lighting solution.
Standards Compliance: This luminaire is designed to meet the rigorous requirements of complex lighting projects. It is ideally suited for challenging environments such as smaller roundabouts, road intersections, pedestrian crossings, or medium-speed urban routes, ensuring full adherence to relevant lighting standards.
| System flux: | 2940 lm - 5600 lm |
| System power: | 21 W- 40 W |
| CCT: | 1800K, 2200K, 2700K, 3000K, 4000K |
| CRI: | ≥70, ≥80 |
| Classification: | IEC protection class I/II, IP66, IK10 |
| Surge protection: | 10 kV (L/N-ground), 6 kV (L-N) |
| Smart lighting: | AstroDIM, Virtual Midnight, StepDIM, DALI |
| On request: | 4-pin socket (ZHAGA book 8), CLO |
| Overtime performance: | L80B10 100.000 hours at Ta=25°C |
| Certification: | pending |
| Net weight: | 3,60 kg |
| Pre-wiring: | preinstalled with fast connector - Default: 3-pin fast connector IP66 on 0,2m 3G1 cable - Optional: custom cable length with or without fast connector |
| Mounting device: | For pole spigot from ⲫ42 to ⲫ60 mm |
| Fixation type: | post top / side entry |
| Tilt angle: | 0°/ 90° |
| Connecting: | IP66 fast connector (2/3 or 5 pole) |
| Housing material: | High pressure die-cast aluminum |
| Finish: | Polyester powder-coated paint in RAL 9007 |
| Optic material: | PMMA High transparent |
| Optical cover: | OPTIWHITE 5 mm tempered glass |
| Cable gland: | stainless steel with pressure equalization membrane |
| Fixation bolts: | stainless steel grade A4 |
CO
Beam with excellent longitudinal luminance uniformity fulfilling EN13201 M-class requirements where road width is equal to or less the pole height.
H3
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is ≥ the pole height. Usually to illuminate up to three lanes in front of the pole.
H4
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is wider than the pole height. Usually to illuminate up to four lanes in front of the pole.
LN
IESNA Type II (medium) beam applicable for European P-class standard pedestrian lighting.
ND
IESNA Type II (medium) beam applicable for European P-class standard pedestrian lighting and M-class roads.
PC
Fully asymmetric beam designed to highlight right side traffic pedestrian crossings.
PR
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is wider than the pole height.
WA
IESNA Type II (medium) beam with excellent backlight control, illuminance uniformity and cutoff.
WD
Universal road lighting beam with excellent mixed illuminance and luminance uniformity. Typically IESNA Type III (medium).
| Attachment | Size |
|---|---|
 Catalogue MT-16 LED | 3.95 MB |
