MT-08 LED-F
The NAIT MINI MT-08 LED-F is the entry-level model in the series, effectively combining affordability with high performance. The Model MT-08 LED-F functions as the entry-level luminaire with a fixed bracket. This setup provides a secure and stable mounting angle, specifically set at 0° or 90°. It is suitable for standard installations that require a fixed, horizontal or vertical position, ensuring simplicity and compliance.
Application Focus: Featuring specialised optics designed for low installation heights and wide light distribution, the MT-08 LED-F is an excellent choice for effectively illuminating pathways, pavements, and pedestrian zones.
Advanced Options: To further enhance energy efficiency and minimise light pollution (improving the quality of the nocturnal environment), the luminaire can optionally include a ZHAGA socket for smart controls and backlight blockers for precise light cutoff.
| System flux: | 700 lm - 2800 lm |
| System power: | 5 W- 20 W |
| CCT: | 1800K, 2200K, 2700K, 3000K, 4000K |
| CRI: | ≥70, ≥80 |
| Classification: | IEC protection class I/II, IP66, IK10 |
| Surge protection: | 10 kV (L/N-ground), 6 kV (L-N) |
| Smart lighting: | AstroDIM, Virtual Midnight, StepDIM, DALI |
| On request: | 4-pin socket (ZHAGA book 8), CLO |
| Overtime performance: | L80B10 100.000 hours at Ta=25°C |
| Certification: | pending |
| Net weight: | 3,5 kg |
| Pre-wiring: | preinstalled with fast connector - Default: 3-pin fast connector IP66 on 0,2m 3G1 cable - Optional: custom cable length with or without fast connector |
| Mounting device: | For pole spigot from ⲫ42 to ⲫ60 mm |
| Fixation type: | post top / side entry |
| Tilt angle: | 0°/ 90° |
| Connecting: | IP66 fast connector (2/3 or 5 pole) |
| Housing material: | High pressure die-cast aluminum |
| Finish: | Polyester powder-coated paint in RAL 9007 |
| Optic material: | PMMA High transparent |
| Optical cover: | OPTIWHITE 5 mm tempered glass |
| Cable gland: | stainless steel with pressure equalization membrane |
| Fixation bolts: | stainless steel grade A4 |
CO
Beam with excellent longitudinal luminance uniformity fulfilling EN13201 M-class requirements where road width is equal to or less the pole height.
H3
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is ≥ the pole height. Usually to illuminate up to three lanes in front of the pole.
H4
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is wider than the pole height. Usually to illuminate up to four lanes in front of the pole.
LN
IESNA Type II (medium) beam applicable for European P-class standard pedestrian lighting.
ND
IESNA Type II (medium) beam applicable for European P-class standard pedestrian lighting and M-class roads.
PC
Fully asymmetric beam designed to highlight right side traffic pedestrian crossings.
PR
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is wider than the pole height.
WA
IESNA Type II (medium) beam with excellent backlight control, illuminance uniformity and cutoff.
WD
Universal road lighting beam with excellent mixed illuminance and luminance uniformity. Typically IESNA Type III (medium).
| Attachment | Size |
|---|---|
 Catalogue MT-08 LED | 4.77 MB |
