MT-32 LED STREET LIGHT

Technical information

Special features

MT Series LED lights allow for fast and safe vertical or side entry installation on poles or consoles from Ø42 to Ø60 mm with a quick connector (so-called "Easy Connect System") which enables you to connect the light without opening the housing. The special and versatile optics of the built-in LED modules ensure that the light meets various lighting standards under different conditions or requirements. The light offers full flexibility for different lighting demands as it is equipped with the latest LED drivers with multiple dimming (StepDIM, AstroDIM in DALI) and controlling options. Durable and robust housing of the light is made of high pressure die-cast aluminum of the highest quality; the light is resistant to vandalism and vibration and has excellent heat dissipation properties. Optional implementations with different LED module configurations with optional CCT (3000 K and 4000 K) and excellent illuminance uniformity.

  • The body of the light is powder coated with corrosion resistant polyester paint. The default color is RAL9007.
  • 5 mm safety tempered glass is easily replaceable.
  • High-pressure die-cast aluminum mounting module is powder coated with polyester, corrosion-resistant paint.
  • All clamps, springs and bolts are made of A2 stainless steel.
  • To install the light on a pole or console, two special stainless steel screws (Allen screws) are used.

These lights offer a wide range of application (technical road lighting, street and avenue lighting, orientation and security lighting, industrial lighting, and park and parking lot lighting).

Lighting (technical) characteristics

The MT-32LED model currently offers a choice between three different photometric options. The right choice depends on the area of use of the LED lamp and is usually determined by lighting calculation.

  • Number of LED sources: 32 x Cree XP-G3
  • CRI: ≥70
  • Luminous efficacy: Up to 134 lm/W (4000K)
  • CCT: 4000 K / 3000K
  • Replaceable LED module: YES
  • OPTICS: OPTICS-C / OPTICS-S / OPTICS-M
Electrical characteristics
  • Input voltage range: 220…240 V / 50…60Hz
  • Surge protection: 10 kV
  • Power factor: 0.95/0.90
  • Protection class IEC: Safety class I, safety class II
  • Controls and dimming: DALI, StepDIM, AstroDIM
  • Interface: DALI, NFC
  • Life span: 100,000 h (L80/B10)
Physical characteristics
  • The body of the light is powder coated with corrosion resistant polyester paint. The default color is RAL9007.
  • 5 mm safety tempered glass is easily replaceable.
  • High-pressure die-cast aluminum mounting module is powder coated with polyester, corrosion-resistant paint.
  • All clamps, springs and bolts are made of A2 stainless steel.
  • To install the light on a pole or console, two special stainless steel screws (Allen screws) are used.
    • Vertical mounting angles: 0° / 10°/ 15°
    • Side-entry mounting angles: 0° / 5°/ 15°
  • Ingress protection code: IP66
  • Mechanical impact protection: IK09 [10 J]
  • Weight: 6,4 kg
Functions and application range

These lights offer a wide range of application (technical road lighting, street and avenue lighting, orientation and security lighting, industrial lighting, and park and parking lot lighting).

Ask us or email us ...

This email address is being protected from spambots. You need JavaScript enabled to view it.
E-mail