LED LATERNA DECORATIVE LED LIGHT

Technical information

Special features

LED LATERNA is a decorative street lighting luminaire. Through years of experience we have in the field of lighting and collaborating with leading European manufacturers, this luminaire has gained an important and well-established place in the field of decorative street lighting. Due to its high quality and directional LED optics, this lamp achieves much better luminous efficacy in comparison to conventional light sources such as high-pressure sodium lamps, metal halide lamps, or compact fluorescent lamps. This means that equivalent or better illumination can be achieved with significantly smaller power consumption. The luminous flux and nominal power of the lamp are fully adjustable and depend on the required illumination values of the surface. The luminaire is made of massive, hand-forged and machined materials that are highly resistant. It has a long life span and packs the latest electronic equipment available. The luminaire is manufactured in Slovenia (entirely).

Lightning (technical) characteristics

The LATERNA LED currently allows for one optics option only. It is possible to use other optics as well, however, the use of those optics must be precisely determined by lighting calculation.

  • Number of LED sources: 16 x Cree XP-G3
  • CRI: >70
  • Luminous efficacy: Up to 97 lm/W (4000K)
  • CCT: 4000 K / 3000K
  • Replaceable LED module: YES
  • ADDITIONAL OPTICS: OPTICS-S / OPTICS-M
Electrical characteristics
  • Input voltage range: 220…240 V / 50…60Hz
  • Surge protection: 10 kV
  • Power factor: 0.95/0.90
  • Protection class IEC: Safety class I, safety class II
  • Controls and dimming: DALI, StepDIM, AstroDIM,
  • Interface: DALI, NFC
  • Life span: 100,000 h (L80/B10)
Physical characteristics
  • The iron housing of the light is galvanized and powder coated with corrosion resistant polyester paint. The default color is RAL7016.
  • 5 mm safety tempered glass is easily replaceable.
  • Wall mounting bracket or mast mounting bracket.
  • All clamps, springs and bolts are made of A2 stainless steel.
  • Ingress protection code: IP66
  • Mechanical impact protection: IK09 [10 J]
  • Weight: 8,7 kg
  • Wall bracket weight: 7 kg
  • Mast bracket weight: 2,1 kg
Functions and application range

Decorative street and avenue lighting, orientation or security lighting, decorative lighting for parks and parking lots.

Catalogue

Technical characteristics of road and decorative LED luminaries.

Ask us or email us ...

This email address is being protected from spambots. You need JavaScript enabled to view it.
E-mail